(navigation image)
Home American Libraries | Canadian Libraries | Universal Library | Community Texts | Project Gutenberg | Biodiversity Heritage Library | Children's Library | Additional Collections
Search: Advanced Search
Anonymous User (login or join us)
See other formats

Full text of "Laser Cutting"

Raspberry Pi Enclosure v1 Assembly 

Make] Projects 

hhiiilH ho/ 1 !/ tuMaal/ chare r\icf*f\\tat* 

build, hack, tweak, share, discover,- 

Raspberry Pi Enclosure vl 


Written By: Eric Weinhoffer 


Raspberry Pi Enclosure (1) 


This guide will show you how to assemble the simple Pi enclosure that's included in the 
Maker Shed Raspberry Pi Starter Kit . 

If you have v2 of the enclosure (if there's nuts and bolts in the bag), go here . 

© Make Projects www.makeprojects.com Page 1 of 4 

Raspberry Pi Enclosure v1 Assembly 

Step 1 — Raspberry Pi Enclosure vl Assembly 

• You should have nine parts in total: 
four side pieces, one bottom piece, 
and four small locks. 

• If your parts look a lot 
different, and there are 
some nuts and bolts in the bag as 
well, head over to the v2 


Step 2 

• Place your Raspberry Pi onto the 
bottom piece. The headers, SD 
card slot, and USB power port 
should be above the side with the 
two small rectangles. 

© Make Projects 


Page 2 of 4 

Raspberry Pi Enclosure v1 Assembly 

Step 3 

• Now attach the two smaller sides, and hold the whole assembly in your hand as shown 

• The side piece with the "Make: Pi" engraving should line up with the SD card slot on 
your Pi - you may have to push the Pi into place. 


Step 4 

• Now slide the two larger side pieces into place. It doesn't matter what order you assemble 
them in. 

# You may have to put some pressure on the side pieces to get everything to fit 
together nicely, but that's ok, it's supposed to be a tight fit. 

• If you're using the included Pi Cobbler, install it on the headers and slide the ribbon 
cable through the side piece before assembling. 

© Make Projects www.makeprojects.com Page 3 of 4 

Raspberry Pi Enclosure v1 Assembly 

Step 5 

• Now insert the four small lock 
pieces into their slots. 

• That's it, you're done! 

This document was last generated on 201 3-01 -28 05:52:01 PM. 

© Make Projects 


Page 4 of 4